The mixer tank is lined with Ni-Hard Cast Iron of 530HB minimum hardness. The mixing arms, with a low profile to avoid material buildup, are made in Spheroidal Cast Iron. The mixing blades are made in Ni-Hard Cast Iron of 530HB minimum hardness. The large number of blades, their position, and their orientation guarantee the right combination between the effects of rolling and the circulation of the material during the mixing action.
The stiffened frame of the tank eliminates the risk of deformation during the transport (also in container) as well as during the full load operation and guarantees the correct planarity of the shafts’ seals. The metal frame for the aggregates hopper and the scales can be laid right on the mixer without additional supports.
The closing of the door is guaranteed by the pressure sensor included in the hydraulic circuit. In case of failure or blackout, a manual pump can be operated for emergency discharge and closure.
MODEL | GTSM-05 | GTSM-10 | GTSM-15 | GTSM-20 | GTSM-25 | GTSM-30 | GTSM-40 | |
CONCRETE OUTPUT PER CYCLE (VIBRATED) | M3 | 0.5 | 1 | 1.5 | 2 | 2.5 | 3 | 4 |
DRY FILLING CAPACITY | M3 | 0.75 | 1.5 | 2.25 | 3 | 3.75 | 4.5 | 6 |
CYCLE TIME (LOADING EXCLUDED) | Sec. | 90 | 90 | 90 | 90 | 90 | 90 | 90 |
MIXING MOTOR | kW / HP | 2x9.3 / 12.4 | 37 / 50 | 45 / 60 | 2x37 / 50 | 2x45 / 60 | 2x55 / 75 | 2x75 / 100 |
MIXING ARMS / BLADES | Nos. | 12+2+2 | 8+2+2 | 12+2+2 | 12+2+2 | 16+2+2 | 16+2+2 | 20+2+2 |
HYDRAULIC POWER PACK MOTOR | kW / HP | 0.75 / 1 | 1.5 / 2 | 1.5 / 2 | 1.5 / 2 | 2.2 / 3 | 2.2 / 3 | 2.2 / 3 |
Per GAJJAR’s policy of constant upgradation of products, specifications are subject to change without prior notice.
1, Plot #35, Road # 52, Opp. Arun Industrial Estate, Near Jay Chemical, Odhav GIDC, Ahmedabad – 382415, Gujarat, India
info@gajjarequipments.com
sales@gajjarequipments.com
+91 99789 92957
+91 99789 92957
1, Plot # 35, Road # 52, Opp. Arun Industrial Estate, Near Jay Chemical, Odhav GIDC, Ahmedabad – 382415, Gujarat, India
WhatsApp us