Bitumen Sprayer allows uniform spraying of bitumen. These sprayers are available in capacities of 3 T, 4 T, 6 T, 8 T, 10 T and 12 Tons. These tar sprayers are with designed to perform in rough conditions and are tried and tested in Indian conditions. Bitumen Pressure Distributor is essential machinery for road building. It is mounted on a suitable truck chassis and moving the same will allow spraying of bitumen on the road prior to laying of hot mix asphalt. It is one of the most important machine for road building.

The tanks are fully insulated form all the sides to avoid heat loss. There is a burner supplied with the machine that will help in maintaining the bitumen in liquid condition. Engine supplied is of reputed make and diesel operated. The design of the machine is very easy and is done with extreme care to ensure uninterrupted operation. GAJJAR Bitumen Sprayers are designed with precision. The quality we give is unparallel. It can be mounted on any new / old suitable truck chassis. All the parts used are highly durable and suited for tough Indian conditions. Operating and maintenance is easy and does not require skilled labour. All the safety points are very well considered while making this sprayer. However tough and accurate your spraying job may be, this sprayer will surely deliver.

Bitumen Sprayer

BITUMEN PRESSURE DISTRIBUTOR

Capacity Range:
3 Ton to 12 Ton

Exceptional
Bitumin Distribution

HIGHLIGHTS

Advantages of Gajjar Bitumen Sprayer

• Uniform Spraying

Equipped with a sophisticated spray bar system, the distributor ensures even distribution of bitumen across the surface. 

• High Capacity

Available in various capacities ranging from 3000 to 12000 Ton, catering to different project sizes.

• Efficient Heating System:

An integrated heating system maintains the bitumen at the optimal temperature for spraying, preventing clogging and ensuring smooth operation.

• User-Friendly Controls

  • The machine features intuitive controls for easy operation, allowing precise adjustment of spray width and pressure.

• Durable Construction

Built with high-quality materials, the distributor is designed to withstand the rigors of road construction environments.

Choosing The Ideal Vehicle for Your Bitumen Sprayer

  • For a 4-ton tank, the chassis length required after the cabin is 16.5 feet.
  • For a 6-ton tank, the chassis length required after the cabin is 19 feet.
  • For an 8-ton unit, the chassis length required after the cabin is 21.5 feet.
  • For a 10-ton machine, the chassis length required after the cabin is 24 feet.
  • For a 12-ton sprayer tank, a chassis with a minimum length of 24 feet after the cabin is needed.
  • Additionally, we need the outer width of the vehicle chassis. This information is crucial for adjusting the width of the sprayer chassis accordingly. By matching the sprayer chassis to your truck chassis width, the sprayer can be fitted easily.

    If the customer can send their vehicle to our factory we can provide installation service of the machine on their truck. If that is not possible the tar/bitumen sprayer can also be installed on the customer’s truck at the site.